Concrete Company

Concrete Company in Greenville You Can Count On

Who We Are and Where We Work in Greenville, SC

We provide concrete services throughout Greenville, SC and the surrounding areas, including Mauldin, Simpsonville, Taylors, Fountain Inn, Travelers Rest, and Berea. Whether your project is close to Downtown Greenville or out along Woodruff Road or Wade Hampton Boulevard, we can get to your site and get started without a long wait. We serve both homeowners and business owners across Greenville County, and we are familiar with the neighborhoods, roads, and local requirements that come with working in this area.

We have over 20 years of combined experience in concrete pouring and finishing, and more than 10 years working right here in the Greenville market. That means we have spent time on job sites in places like Hartness, Hollingsworth Park, Five Forks, and along Augusta Street. We hold our SC Contractor's License and carry full insurance, so you are covered from the first shovel to the final cleanup. We know what a concrete contractor handles on a day-to-day basis, and we bring that knowledge to every job we take on, big or small.

Common Problems That Bring People to a Concrete Company

Most people reach out to us because something is already going wrong. A driveway has started cracking. A patio has settled unevenly and now holds water after rain. A sidewalk has heaved and become a trip hazard. Some folks are planning something new, like a garage slab, a carport pad, or a commercial concrete project, and they want to get it done right the first time. Others have gotten a quote from someone cheap and are wondering why the number is so low. These are all situations we hear about regularly, and they are all situations we can help with.

Whether you need concrete repair, a new installation, or help understanding your options before you commit to anything, we can walk you through it. We also know that concrete prices are a real concern. We give straightforward estimates based on your actual site, not a number pulled out of thin air, so you can plan your budget with confidence.

What Makes Greenville Soil, Weather, and Neighborhoods Unique

Greenville sits in the Piedmont region of South Carolina, and that geography matters when it comes to concrete work. The red clay and expansive soil common throughout Greenville County can shift with moisture changes, which puts stress on slabs that were not properly prepared underneath. We account for this by compacting the subgrade carefully and selecting the right mix design for local conditions. For most residential slabs, we use a 4000 psi mix with proper reinforcement, whether that is #4 rebar or fiber mesh, depending on the load and use of the surface.

Greenville also gets meaningful rainfall throughout the year. The Reedy River and Brushy Creek drainage areas remind us that water management is not something to overlook. Proper slope, joint placement, and in some cases a vapor barrier under the slab are all steps we take seriously here. The climate is mild compared to states further north, but freeze-thaw cycles do occur, and that means we pay attention to air entrainment and curing practices to protect the surface long-term. We have worked on projects near Paris Mountain, out toward Pelham Road, and through neighborhoods like Botany Woods and Chanticleer, so we understand how the terrain and drainage vary across the county.

Frequently Asked Questions from Greenville Homeowners and Business Owners

Do you pull permits? Yes. We work with the City of Greenville Building Codes Division and Greenville County Building Safety depending on where your project is located. We handle the paperwork so you do not have to.

How long does a typical project take? It depends on the scope. A standard residential driveway or patio usually takes one to two days for the pour itself, with a curing period afterward before heavy use. Larger commercial concrete or concrete foundations projects take longer, and we will give you a realistic timeline upfront.

Do you offer decorative options? Yes. We work with stamped concrete, colored concrete, and exposed aggregate finishes. Decorative concrete is a popular choice for patios and pool decks, and we can show you examples of past work we have done in the Greenville area.

Are you insured and licensed in South Carolina? Yes. We carry our SC Contractor's License through the SC Department of Labor Licensing and Regulation, and we are fully insured on every job.

If you have a question that is not covered here, the best step is to reach out and we can talk through your specific project. Understanding what a concrete contractor handles is a good place to start, and that is exactly what the next section covers.

What a Concrete Company Does

When you hire a concrete contractor, you are bringing in a crew with the tools, training, and materials to plan, pour, finish, and seal concrete the right way from start to finish. We have over 20 years of combined experience pouring concrete and more than 10 years working specifically in Greenville, SC. That means we understand the red clay and expansive soils common throughout the Piedmont region, the rainfall patterns that affect drainage and grading, and the local permitting process through offices like the City of Greenville Building Codes Division and Greenville County Building Safety. We pull the right permits, prep the subgrade properly, and use mix designs suited to the job at hand.

Residential Concrete Services We Offer

We work with homeowners across Greenville neighborhoods like Augusta Road, North Main, Verdae, and Taylors on a wide range of projects. Our residential concrete work includes driveways, patios, sidewalks, pool decks, steps, and concrete foundations. We also offer decorative options like stamped concrete and colored finishes for homeowners who want a surface that holds up well and looks good doing it. Every residential pour starts with proper site prep, correct reinforcement, and a mix design matched to the load and exposure the slab will face.

Commercial Concrete Services We Offer

For businesses, property managers, and developers working along corridors like Woodruff Road or near areas such as the Greenville-Spartanburg International Airport, we handle commercial concrete flatwork, concrete paving, warehouse floors, loading docks, and site slabs. Commercial concrete pouring often calls for higher-strength mixes, tighter tolerances, and more detailed coordination with other trades. We are familiar with SC DOT specifications and the standards set under ACI 301 that apply to many commercial jobs in Greenville County.

Repair, Resurfacing, and Emergency Concrete Work

Not every job is a new pour. We also provide concrete repair services for cracked driveways, spalling slabs, sunken sections, and deteriorating joints. Greenville's clay subgrade can shift with moisture changes, and that movement often causes settling or cracking over time. We assess the root cause before recommending a fix, whether that means grinding and resurfacing, foam lifting, or a full replacement. For urgent situations like a damaged loading dock or a hazardous crack near a public walkway, we can prioritize scheduling to get the problem addressed quickly.

From a single residential stoop to a large commercial slab, the type of project shapes every decision we make about materials, crew size, equipment, and timeline. That brings us to the specific kinds of concrete projects we handle in and around Greenville.

Types of Concrete Projects We Handle

After more than 20 years of pouring concrete and over a decade working specifically in Greenville, we have handled just about every type of residential concrete and commercial concrete project you can think of. Whether you are in Mauldin, Taylors, or closer to Downtown Greenville, the work stays the same: proper prep, the right mix, and clean execution from start to finish.

Driveways

A concrete driveway takes a beating every day from vehicle weight, oil, and Greenville's rainfall. We account for the red clay subgrade common throughout the Piedmont region by compacting the base properly before any concrete pouring begins. Most residential driveways we pour use a 4000 psi mix with #4 rebar or wire mesh, depending on the load requirements. Concrete paving done right the first time saves you from dealing with cracking and settling down the road.

Patios and Outdoor Living Spaces

Greenville's climate makes outdoor living possible most of the year, so a well-built patio adds real usable space to your property. We work with plain broom-finished concrete as well as decorative concrete options like stamped concrete and exposed aggregate. These finishes hold up well through our warm, humid summers and occasional freeze cycles. If you are in a neighborhood like Verdae or Hollingsworth Park where HOA guidelines apply, we can help you stay within those requirements.

Foundations and Slabs

Concrete foundations require more planning than most other flatwork. Greenville County's expansive soils and variable bearing capacity mean the subgrade needs careful evaluation before formwork ever goes up. We follow ACI 332 guidelines for residential foundation work and typically spec a 4000 psi or 5000 psi mix depending on the structural load. A vapor barrier goes down before the pour on any interior slab to manage moisture coming up through the ground.

Sidewalks and Walkways

Whether we are working on a private walkway in a backyard or a commercial path near a property on Woodruff Road or Pelham Road, sidewalk work has to be graded correctly for drainage and finished with a non-slip texture for safety. We cut control joints at the right intervals to manage where the concrete wants to crack naturally, which keeps the surface looking clean longer. Permits through the City of Greenville Building Codes Division or Greenville County Building Safety may be required depending on the location, and we handle that process with you.

Retaining Walls and Steps

Retaining walls and steps involve more than just forming and pouring. Proper drainage behind a retaining wall is critical, especially given how much rain the Reedy River watershed area can see in a single storm event. Without it, hydrostatic pressure builds up and causes walls to lean or fail. We use the right reinforcement layout and drainage aggregate to keep things stable long term.

Each of these project types calls for its own approach to concrete mix design, thickness, and surface finish, which is worth understanding before your project gets started.

Concrete Mix Options and Finishes

Choosing the right concrete mix and finish is not just about looks. In Greenville, the material choices we make before a single truck arrives on your property affect how long your concrete lasts and how well it holds up over time. We take mix design seriously because the wrong mix for local conditions leads to cracking, spalling, and costly repairs down the road.

Standard Concrete Mix and Why It Matters in Greenville's Climate

Greenville sits in the Piedmont region, where red clay and expansive soils shift with moisture changes throughout the year. We account for that when we select your mix. For most residential driveways and patios, we pour a 4000 psi mix reinforced with #4 rebar on a properly compacted subgrade. For heavier commercial concrete applications, we move up to 5000 psi or higher depending on load requirements.

Our mixes follow ACI 301 guidelines and often include supplementary cementitious materials like fly ash or slag cement, which improve workability and long-term durability. A controlled water-to-cement ratio, typically around 0.45 to 0.50, helps maintain strength and reduces surface problems after curing. We work with trusted local suppliers to ensure every ready-mix truck arriving on your site meets ASTM C94 standards before concrete pouring begins.

Decorative Options Including Stamped, Colored, and Exposed Aggregate Concrete

If you want your driveway, patio, or walkway to stand out in a neighborhood like Botany Woods or Augusta Road, decorative concrete gives you a lot of ways to do that. Stamped concrete uses textured mats pressed into fresh concrete to mimic stone, brick, slate, or wood. We add integral color or surface-applied color hardener to complete the look.

Exposed aggregate is another popular choice. We remove the top layer of cement paste during concrete finishing to reveal the natural stone below, often using crushed granite or river sand aggregate for a clean, textured surface. It adds grip underfoot and weathers well in Greenville's mix of heat, rain, and occasional freezing temperatures. Color options range from subtle earth tones to bolder shades, depending on what fits your property.

Polished and Stained Concrete for Interior and Exterior Surfaces

Polished concrete is common in commercial spaces like retail floors, warehouses, and office lobbies, but we also install it in residential garages and covered outdoor areas. The process involves grinding the surface down in stages and then applying a sodium silicate densifier to harden and seal the pores. The result is a smooth, low-maintenance surface that holds up well under heavy foot and vehicle traffic.

Stained concrete works well for both interior slabs and exterior patios. Acid-based stains react chemically with the concrete to create color variation that looks natural rather than painted on. Water-based stains give you more consistent, predictable color if you have a specific look in mind. Both types benefit from a quality concrete sealer applied after the stain cures, which protects the surface and makes cleaning easier.

Permeable Concrete for Stormwater Management

Greenville County gets significant rainfall each year, and Greenville County Stormwater Management has guidelines in place that affect how water runoff is handled on developed properties. Permeable concrete is one practical way to meet those requirements while still giving you a durable, functional surface.

Unlike standard concrete, permeable mixes use little to no fine aggregate, which creates a porous structure that allows water to pass through into the ground below. This reduces runoff, lowers the load on storm drains, and helps protect areas near Brushy Creek or other local waterways from erosion and sediment. We size the stone carefully and pay close attention to the subgrade below to make sure water moves through at the right rate without undermining the slab.

Whether you are working on a standard slab or something more specialized, the mix and finish we recommend will always be matched to your specific site conditions and project goals. Once we have helped you settle on the right approach, the next step is understanding exactly how we go from an empty lot or worn-out surface to finished concrete you can count on for years to come.

Our Installation Process

Site Visit, Measurements, and Project Planning

Before we pour a single yard of concrete, we come out to your property and take a close look at what we are working with. We measure the area, check the grade, and take note of anything that could affect the job, like tree roots, existing drainage patterns, or access points for our equipment. Greenville's Piedmont region soils, including the red clay and saprolite common across neighborhoods from Berea to Simpsonville, can shift and settle if they are not properly accounted for before the project starts. We use that site visit to plan the right mix design, slab thickness, and reinforcement layout so the finished product holds up for years. You will know the scope, the timeline, and the cost before any work begins.

Site Preparation, Grading, and Drainage

Good concrete starts with what is underneath it. We use a plate compactor and skid steer to prepare the subgrade, removing soft or unstable fill material and compacting the base to meet proper bearing capacity. Greenville gets around 50 inches of rain a year, so we take drainage seriously. We grade the site so water moves away from your structure and does not pool along the slab edges. Where needed, we place a vapor barrier beneath the concrete to manage moisture coming up from the ground. Skipping these steps is one of the most common reasons slabs crack, heave, or settle prematurely.

Forming, Pouring, and Finishing

We set formwork carefully to hold your specified dimensions, then place reinforcement, typically #4 rebar or wire mesh, at the correct depth and spacing before the ready-mix truck arrives. Our mix designs follow ACI 301 standards and are matched to your project, whether that is a 4000 psi residential concrete driveway or a higher-strength commercial concrete slab. We use concrete vibrators to eliminate air pockets during the pour, then finish the surface with bull floats and power trowels to achieve a consistent, durable result. For decorative concrete projects like stamped concrete or exposed aggregate, we time the finishing steps precisely because the window for that work is narrow and weather-dependent.

Curing, Sealing, and Final Cleanup

Curing is where a lot of concrete work goes wrong. If the surface dries out too fast, you end up with a weaker slab that dusts and scales over time. We apply a curing compound right after finishing to slow moisture loss and let the concrete reach its full 28-day compressive strength. Once the slab is ready, we apply a concrete sealer suited to your surface type and use case. Before we leave, we remove all formwork, haul away debris, and restore the surrounding area as close to its original condition as we can. We hold a SC Contractor's License and carry full insurance, which brings us to what that means for your project.

Licensing, Insurance, and Local Compliance

When you hire a concrete contractor, you deserve to know they have the right credentials before any work begins. We hold an active SC Contractor's License through the SC Department of Labor Licensing and Regulation, and we carry general liability insurance along with workers' compensation coverage. That means if something unexpected happens on your property, you are protected. Our crew members have completed OSHA training, and our work follows ACI 301 standards for concrete construction. These are not just boxes we check. They are the foundation of how we do business every day on every job.

Our Licensing and Insurance Credentials

Our SC Contractor's License covers both residential concrete and commercial concrete work across Greenville County and the surrounding Upstate area. We also carry ACI-certified technicians who understand proper mix design, field testing, and finishing procedures. Before we pour a single yard of concrete, we verify that our insurance coverage is current and that it applies to your specific project type, whether that is a driveway in Botany Woods or a commercial slab near the Woodruff Road corridor.

Permits and Inspections in Greenville County

Depending on your project, you may need a permit from the City of Greenville Building Codes Division or Greenville County Building Safety. Concrete foundations, larger flatwork, and any work tied to structural improvements often require a permit and a scheduled inspection. We handle the permit application process for you, coordinate with local inspectors, and make sure the work meets IBC requirements and local code. Skipping this step can lead to problems when you sell your home or file an insurance claim, so we take it seriously on every job.

HOA Regulations and Municipal Codes in Greenville

Many neighborhoods across Greenville, including subdivisions like Hartness, Hollingsworth Park, and Bent Creek, have HOA rules that govern the appearance and placement of concrete paving, patios, and other flatwork. Municipal codes set by the City of Greenville Engineering Department also apply in certain areas, covering things like setbacks, drainage, and allowable surface materials. We review any HOA guidelines you provide before the project begins and help you avoid the kind of after-the-fact problems that can require costly changes. Knowing these rules ahead of time is part of what makes the whole process smoother for you.

All of this local knowledge and compliance experience connects directly to something bigger. The reason we can navigate permits, HOA rules, and code requirements without slowing your project down is because of years spent working right here in Greenville.

Your Greenville Concrete Crew With 20 Years Experience

We are a concrete contractor based in Greenville, SC, and we have been pouring and finishing concrete in this area for over 10 years. Our crew brings more than 20 years of combined hands-on experience to every job, from small residential repairs to large commercial pours.

Working in Greenville means we know this area well. We understand the local soil conditions, the humidity that comes with South Carolina summers, and how the seasonal temperature swings here can stress a concrete surface if the mix and curing process are not handled correctly. That kind of local knowledge matters on every job we take on, whether we are installing a driveway in Simpsonville, a pool deck in Taylors, or a commercial slab in downtown Greenville.

We handle the full range of concrete work. That includes driveways, patios, garage floors, pool decks, sidewalks, foundations, retaining walls, stamped and decorative concrete, concrete cutting and removal, resurfacing, sealing, and staining. We also work on commercial and industrial projects, including parking lots, warehouse floors, and ADA-compliant ramps and sidewalks.

When you hire us, you get a crew that shows up prepared. We handle permits, site prep, forming, pouring, finishing, and cleanup. We carry insurance and stand behind our work with a written warranty. You will know exactly what is included before we start, and we keep you informed throughout the project.

If you have a concrete project coming up and want to know what it will take to get it done right, we are glad to come out, take a look, and give you a free estimate.

Why Our Local Experience Matters

Over 20 Years of Concrete Experience and 10 Years in Greenville

We have been pouring concrete for over 20 years and have spent more than a decade working right here in Greenville. That means we know the roads, the neighborhoods, and the kinds of projects that come up in this area. Whether you are near Augusta Road, out in Simpsonville, or closer to Taylors, we have most likely worked on a project nearby. Our team holds an SC Contractor's License and follows ACI 301 standards for concrete services on both residential concrete and commercial concrete jobs.

How We Work with Local Soil and Drainage Conditions

Greenville sits in the Piedmont region, and the red clay and expansive soil common throughout Greenville County can cause slabs to shift, crack, or settle if the ground is not prepared correctly. Before we place a single yard of concrete, we make sure the subgrade is properly compacted and graded. We also account for Greenville's rainfall patterns and the drainage demands of your specific site. For most residential slabs, we use a 4000 psi mix with fiber mesh reinforcement and proper joint layout to reduce cracking over time. On projects near areas like Brushy Creek or along the lower ground near the Reedy River, drainage grading gets extra attention. Good site prep is what separates concrete that lasts from concrete that needs concrete repair in a few years.

Our Crew, Equipment, and Project Capacity

We run experienced crews that handle concrete pouring, concrete finishing, and concrete foundations for projects of different sizes. We use commercial-grade equipment including power trowels, concrete vibrators, and laser screeds to produce a consistent, level surface. For larger pours or hard-to-reach areas, we coordinate concrete pump trucks to keep the job moving. We work on driveways, patios, slabs, sidewalks, concrete paving, decorative concrete, and stamped concrete. If you are planning a project and want to know whether your timeline and budget line up, that is exactly what we cover next.

Pricing, Timelines, and Payment

How we estimate concrete project costs in Greenville

When you reach out to us for a quote, we start by visiting your site in person. Greenville's soil conditions vary quite a bit across the area. Red clay and expansive soils common throughout the Piedmont region can affect how much subgrade prep your job needs before we ever pour. That prep work directly affects your final cost, and we factor it in upfront so you are not surprised later.

Concrete prices depend on several things: the size of the slab, the mix design required, reinforcement like rebar or wire mesh, and any decorative finishes you want. A basic 4-inch residential slab using 3000 psi mix costs less than a 6-inch commercial slab calling for 4000 psi or higher. We walk you through those differences clearly so you understand what you are paying for and why.

We also account for local permitting. Depending on your project, you may need approval through the City of Greenville Building Codes Division or Greenville County Building Safety. We know those processes well and build that into your estimate from the start.

Typical project timelines from start to finish

Most residential concrete services in Greenville follow a straightforward timeline. After we finalize your quote and you approve the work, we schedule the job based on crew availability and weather. Greenville gets meaningful rainfall throughout the year, so we watch the forecast closely and plan concrete pouring on days when conditions are right for proper curing.

For a standard driveway or patio, site prep and forming typically take one day. Concrete pouring and finishing happen the next. After that, the slab needs time to reach adequate strength before you use it. We generally ask that you stay off foot traffic for 24 to 48 hours and keep vehicles off for at least seven days. Full 28-day compressive strength develops over the following weeks, and we let you know exactly what to expect at each stage.

Larger projects like concrete foundations or commercial paving take longer due to inspection holds, cure schedules, and coordination with other trades. We give you a realistic schedule at the start and keep you updated if anything changes.

Payment terms and financing options

We keep our payment structure straightforward. For most jobs, we collect a deposit before work begins, with the remaining balance due upon completion. We do not ask for full payment upfront, and we do not walk away until you are satisfied with the finished work and the site is cleaned up.

If your project is larger and you want to spread out costs, we can talk through options during your estimate. Whether you are a homeowner near Augusta Road planning a new driveway or a business along Woodruff Road adding a commercial concrete slab, we want the financial side of things to be as clear as the work itself.

Once your project is complete, the conversation does not end there. Knowing what stands behind the work matters just as much as the price you paid to get it done.

Warranties and Workmanship Guarantees

When you hire us for any concrete services, from a simple sidewalk to a full commercial concrete project, you deserve to know what happens if something goes wrong. With over 20 years of combined experience pouring concrete and more than 10 years working right here in Greenville, we stand behind every job we complete.

What Our Warranty Covers

Our workmanship warranty covers defects that result from how we placed, finished, or cured the concrete. That includes problems like premature surface scaling, significant cracking beyond normal shrinkage, uneven settlement caused by improper subgrade preparation, and drainage issues tied to incorrect grading. We use mix designs that meet or exceed 4000 psi at 28-day compressive strength on most residential and commercial slabs, and we follow ACI 301 standards on every pour. When we use materials like fiber mesh or rebar reinforcement, those are included in what we stand behind.

It is worth noting that not every crack signals a workmanship problem. Greenville sits in the Piedmont region, where red clay and expansive soils can shift with seasonal moisture changes. Normal hairline shrinkage cracks are common in concrete and are not the same as structural failure. We are straightforward with you about the difference, and our warranty language reflects that clearly before any work begins.

How We Handle Issues After the Job Is Done

If you notice something that concerns you after we finish, the first step is simply to contact us. We will schedule a time to come out and look at it in person. We do not ask you to submit a form and wait weeks. Most of our jobs are in and around areas like Mauldin, Simpsonville, Taylors, and the Woodruff Road corridor, so getting back to a job site quickly is usually not a problem.

If the issue falls under our warranty, we handle the repair at no cost to you. If it turns out to be something outside our scope, like damage from a vehicle, tree roots, or an unrelated drainage issue on your property, we will walk you through what caused it and give you an honest assessment of your options for concrete repair. We carry general liability insurance and operate with a valid SC Contractor's License, so you are protected throughout the process.

Knowing what a contractor delivers after the job is done matters just as much as the work itself. That is why looking at our past projects and hearing from other Greenville property owners is a natural next step.

Reviews, References, and Past Work

What Our Greenville Customers Say About Us

When you are looking for a concrete contractor in Greenville, SC, hearing from past customers matters. We encourage you to ask us for references from homeowners and business owners we have worked with across the area, from Taylors and Mauldin to the Augusta Road corridor and Simpsonville. Our customers can speak to how we handled their specific job, how we communicated throughout the process, and what the finished surface looks like today compared to the day we poured it.

We take our reputation seriously because Greenville is not a large, anonymous market. People talk to their neighbors in Botany Woods, compare notes in Verdae, and share experiences with other property owners along Woodruff Road. Word of mouth has been one of the most consistent ways we find new customers, and we believe that reflects the quality of our work more than anything we could say about ourselves.

Portfolio of Completed Projects in the Greenville Area

Over our more than 10 years working in Greenville County, we have completed residential concrete and commercial concrete projects of all sizes. Our portfolio includes driveways in Hollingsworth Park, patios in Five Forks, stamped concrete around pools in Bent Creek, and concrete foundations for new construction near the Brushy Creek area. We also handle concrete repair and concrete paving for commercial properties along busy corridors like Pelham Road and Laurens Road.

Photos of past work give you a real sense of what we deliver, from the texture and color of decorative concrete finishes to the clean lines of a freshly poured driveway or walkway. We are happy to share project photos and connect you with customers whose jobs closely match what you have in mind. When you are ready to talk through your project and see what we have done for others in your part of Greenville, we can walk you through everything in detail.

Ready to Work With a Concrete Contractor You Can Trust in Greenville, SC

Once you have looked through reviews, checked references, and seen what a contractor has built around Greenville, the next step is getting someone out to your site. We know that choosing the right crew for your project takes time and careful thought, and we appreciate that you have done your homework.

When you hire us, here is what you get:

• Over 20 years of combined experience with concrete pouring, concrete finishing, and proper curing methods
• More than 10 years working specifically in Greenville, SC, including familiarity with the red clay and expansive soils common across the Piedmont region
• Proper site grading and subgrade compaction to protect your slab from settling, which matters given how much rainfall this area sees near waterways like the Reedy River and Brushy Creek
• Honest, transparent concrete prices with no surprise charges at the end of the job
• Full residential concrete and commercial concrete services, from driveways and patios to slabs, concrete foundations, and concrete paving
• Decorative options including stamped concrete and colored finishes for projects where appearance matters
• Concrete mixes matched to your load requirements, whether that is a 3000 psi driveway or a 5000 psi commercial slab
• Proper reinforcement using rebar and fiber mesh along with control joints to reduce cracking over time
• Compliance with permit requirements through the City of Greenville Building Codes Division and Greenville County Building Safety
• Concrete repair and resurfacing for surfaces that have already seen wear
• Insurance, licensing through the SC Department of Labor Licensing and Regulation, and accountability from start to finish
• Clean site restoration after the job is done, including proper disposal and protection of your landscaping

We serve neighborhoods and areas all across the Upstate, including Augusta Road, North Main, Mauldin, Simpsonville, Taylors, Travelers Rest, and communities along Woodruff Road and Pelham Road, among many others.

Getting started is straightforward. Fill out the quote form below or give us a call to schedule a free site visit. We will take accurate measurements, walk the job with you, and give you a clear written estimate so you know exactly what to expect before any work begins.